Publish Time: 2022-11-05 Origin: Site
The multi-purpose diamond grinding wheel can take on high working load with a heated steel alloy body. Its turbo working layer can grind stones and the other side of the continuous edge can cut stones if it is sanded sufficiently thin. So it is both a blade and a grinding wheel with a good price-performance ratio.
What is the main purpose of the grinding wheel?
What are the characteristics of the grinding wheel?
When should the grinding wheel be overhauled?
Due to the three characteristics of diamond grinding wheel, high hardness, high compressive strength and good wear resistance, the diamond grinding wheel is an ideal tool for grinding hard and brittle materials and carbide. It not only has high efficiency, high precision, but also the characteristics of good roughness, low consumption of grinding tools, long service life, etc. and can also improve the working environment. Therefore, it is widely used in metallic and non-metallic hard and brittle low iron content materials, which are difficult to process with ordinary grinding tools, such as carbide, high alumina porcelain, optical glass, agate gemstones, semiconductor materials, stone materials and other materials.
1.The parallel grinding wheel base with the same thickness is easy to process, with low cost and good dynamic balancing performance, but the grinding wheel base has a thin hole wall, which is not conducive to center positioning and has low safety factor.
2.grinding wheel base with thin hole wall and thick circumferential surface, this base can reduce the weight of grinding wheel, reduce the load on the shaft, facilitate centering and improve the crack resistance.
3. Approximately the same grinding wheel base. The approximately uniform strength ceramic CBN grinding wheel fully utilizes the material of each part of the matrix, but the matrix is difficult to process and the processing cost is high.
Lack of cutting force and unevenness due to wear of the grinding wheel due to passivation and clogging are directly reflected in the grinding result; So if the following conditions occur during grinding, it is time to align the grinding wheel!
1.Slip: As the grinding wheel loses the cutting force, it becomes a flat surface, just like the tread of the tire is smoothed, and the friction force is lost. In this case, the slippage phenomenon occurs easily.
2. Burns: Burns are the most serious case of cutting force loss. This situation most often occurs when cutting force is lost due to clogged pores and needs to be repaired immediately.
3.Vibration/noise: This condition is another phenomenon besides slip, since the surface of the grinding wheel cannot effectively touch the workpiece without friction. If the roundness of the grinding wheel is lost and unevenness occurs, vibrations and even noise occur.
4.Dimensional inaccuracy: The loss of dimensional accuracy indicates that the cutting force loss of the grinding wheel is very large and needs to be re-ground immediately.
5.Scratches or abnormal grinding lines on the surface of the workpiece: If there are scratches on the surface of the workpiece, this means that the grinding wheel's self-sharpening ability decreases, and the abnormal grinding lines usually indicate grinding wheel performance begins to have problems.
Hubei Little Ant Diamond Tools CO., Ltd is committed to providing the most suitable grinding wheel at a reasonable price and everything necessary to meet customer's needs.