How to install the saw blade?

When using saw blades, you may want to know about the precautions to take when installing and using them. The following is the information I found on the Internet about the use of saw blades and other related information, I hope it will help you. If you have any questions, you can contact us, we have professional staff at your service.

This passage is going to talk about the followings of saw blades:

1) How to install the saw blade?

2) Attentions

3) About us

1) How to install the saw blade?

First of all, check whether the equipment for installing the saw blade is in good condition, no deformation of the spindle, no diameter jump, firm installation and no vibration, etc.

Then check whether the saw blade is damaged, whether the tooth type is complete, whether the saw plate is flat and smooth, and whether there are other abnormalities to ensure the safety of use.

When assembling the saw blade, make sure that the arrow direction of the blade is the same as the direction of rotation of the machine spindle.

When installing the saw blade, keep the axis, chuck and flange clean, the inner diameter of the flange is the same as the inner diameter of the saw blade, ensure that the flange is closely combined with the saw blade, install the positioning pin and tighten the nut. The size of the flange should be appropriate, the outer diameter should be not less than 1/3 of the saw blade diameter.

Finally, before the equipment starts, ensure the safety of the situation, there is a single person to operate the equipment, point idle, check whether the equipment steering is correct, there is no vibration, saw blade installed first idle for a few minutes, no slippage, swing or jumping after normal work.

2) Attentions

1. Choose the right saw blade according to the design of the equipment and the requirements of the work needs. If you have questions about this part, you can check the relevant articles or consult contact us.

2. The equipped chainsaw or other saw equipment should have safety protection devices, such as: protective cover, power-off brake, overload protection.

3. It must be that professional operators install and use the saw blade, and wear labor clothing, wearing protective glasses, ear muffs, etc. Pay attention to the use of safety norms.

4. The clothing of the saw blade operator also needs attention. No gloves, long hair should be placed in the work cap, and attention to the tie and cuffs to prevent danger.

5. The saw blade workshop should be kept away from fire source and wet environment.

3) About us

Established in 2003, Hubei Little Ant Diamond Tools Co., Ltd. is a company specializing in the field of diamond tools, located in Huang gang City, Hubei Province, and is one of the largest manufacturers in China.

The factory has a modern standard factory, workshop, office building and storage center, with a total area of over 90,000 square meters at present. We have more than 500 experienced employees engaged in research, development, production, sales and after-sales service. Today, Little Ant is becoming one of the largest manufacturers of stone processing, offering polishing, cutting, grinding and drilling products. Little Ant has always been the leader in China when it comes to product development.

Little Ant's products are not only dealer friendly, but also end-user friendly. Our products can be better adapted to most machines, in terms of performance and price. It can help thousands of customers to solve the problems that arise in stone processing. Choose Little Ant for better cooperation and a win-win situation.