English
Views: 66 Author: Site Editor Publish Time: 2022-06-02 Origin: Site
The service life of diamond circular saw blade is much longer than that of carbon steel and high-speed steel, but some problems in use should be paid attention to.
What is the difference between a dry diamond circular saw blade and a wet diamond circular saw blade?
What should I pay attention to when installing the diamond circular saw blade?
What should we pay attention to before using the diamond circular saw blade?
The dry diamond circular saw blade is different from the wet saw blade in that it does not use cutting fluid for cutting, so it needs to be able to supplement the functions of cooling and increasing cutting force.
Because dry cutting is mostly designed with large sawtooth shape due to the need for heat dissipation, while wet cutting is mostly circular saw type or small sawtooth. Because circular saw blades are widely used in various cutting machines. Therefore, dry diamond circular saw blade and wet diamond circular saw blade have different characteristics and uses. In general, the reason for choosing dry cutting is to observe the cutting surface, reduce cutting noise, and cooperate with the design of the cutting machine and other factors.
Whether the diamond circular saw blade is installed correctly or not and the installation accuracy are closely related to the cutting efficiency, cutting quality and service life of the saw blade. After installation, make sure that the saw blade runs smoothly and does not vibrate during the cutting process (except for the influence of the quality of the saw blade and the rigidity of the cutting machine).
When installing the diamond circular saw blade, first make sure that the cutting edge direction marked on the saw blade is consistent with the rotation direction of the cutting machine spindle; to clean the contact surface of the saw blade installation hole, cutting machine spindle and flange, it is necessary to Ensure that the contact between them is smooth and good; the diameter of the flange should be reasonably selected according to the diameter of the saw blade. If the flange is too small, the end face of the saw blade will swing greatly when used. If the flange is too large, the hanging weight of the spindle will increase, which will also increase the runout and reduce the processing depth of the material.
1. Please hang the diamond circular saw blade vertically on a dry shelf, be sure to avoid damp places, and never place the alloy saw blade flat on the ground or on the shelf, as it will cause the alloy saw blade to deform.
2. When using, do not exceed the maximum speed specified by the diamond circular saw blade.
3. Before use, you must wear protective cover, gloves, hard hat, labor insurance shoes, and protective glasses.
After reading, do you have a deeper understanding of diamond circular saw blade? For further information, please contact Hubei Little Ant Diamond Tools CO., Ltd. They will be very pleased to help you!
