info@little-ant.cn
+86-18779266746
English
Views: 49 Author: Site Editor Publish Time: 2022-06-23 Origin: Site
The diamond circular saw blade can be used to process non-ferrous metals such as copper, zinc, aluminium and their alloys. The material adheres easily to the tool and is difficult to process. By using the properties of diamond's low coefficient of friction and low affinity to non-ferrous metals, diamond circular saw blade can effectively prevent the metal from bonding to the tool.
What is the feed speed of the diamond circular saw blade?
What is the relationship between service life and sharpness of a diamond circular saw blade?
What factors influence the work of the diamond circular saw blade?
The feed rate of the diamond circular saw blade is the feed rate of the stone to be sawn. Its size influences the cutting speed, the force on the saw blade and the heat dissipation in the saw area. Its value should be chosen according to the nature of the stone to be sawn. In general, when sawing soft rock such as marble, the feed rate can be increased accordingly. If the feed speed is too low, it is more conducive to improve the saw speed. When sawing fine-grained and relatively homogeneous granite, the feed rate can be increased accordingly. If the feed speed is too low, the diamond blade is lightly ground. However, when sawing granite with coarse-grained structure and uneven hardness, the feed rate should be reduced, otherwise the saw blade will vibrate and the diamond will break and the saw speed will be reduced. The feed rate for sawing granite is generally chosen in the range of 9 m to 12 m/min.
When the diamond concentration in the diamond circular saw blade changes from low to high, the sharpness of the saw blade and saw performance gradually decrease, and the service life is gradually extended, but if the concentration is too high, the saw blade will become dull. At lower concentrations, efficiency is improved. Therefore, in the manufacturing process of diamond circular saw blade, the diamond concentration should be appropriately controlled according to the various cutting objects and the machine used, so that the diamond can be fully utilized during the use process.
When cutting stones, the diamond circular saw blade is exposed to varying loads such as centrifugal force, saw force and saw heat.
Grinding and breaking of diamond circular saw blades due to force and temperature.
Force effect: In the sawing process, an axial force and a tangential force are applied to the saw blade. Due to the force in the circumferential and radial direction, the saw blade is wavy in the axial direction and bowl-shaped in the radial direction. These two types of deformation cause uneven rock cut, waste of stone material, loud noise and increased vibration during sawing, resulting in premature damage to the diamond agglomeration and shortening the life of the saw blade.
Hubei Little Ant Diamond Tools CO., Ltd. has been operating for more than ten years and focuses on the production of diamond circular saw blades. Here you will find the diamond circular saw blades you need.
